CNC Hydraulic Press Brakes
TORO Mild Hybrid |TORO Pro | TORO Basic | TORO Basic Eco | TORO NC | TORO Heavy Duty
TORO Pro is the highest peak in KARMET's edgebanding production.
Developed by our engineers to be a multifunctional press brake, TORO Pro finds application in diverse industries.
Carefully selected components, a robust steel housing (ST44 A1) and a wide range of standard equipment such as a 4-axis backgauge with servo motors (X,R,Z1,Z2), CNC anti-deflection system, hydraulic upper holders and full tooling make TORO Pro suitable for complex productions - from low to high production volumes.
When setup time is critical for operators, the TORO Pro uses the easy-to-use ESA S 675 2D controller, which can significantly reduce setup time and recreate part programs. The TORO Pro’s anti-deflection CNC system ensures even angles along the entire length of the parts without operator intervention. The 4-axis backgauge with motorized Z-fingers and hydraulic upper holders make step-by-step bending, which involves various tools, very easy to perform.
InquiryTORO Catalog
Standard equipment
- Y1–Y2 synchronized hydraulic cylinders.
- X, R servo back gauge operated via ball screw mechanisms and linear guideways.
- Motorized crowning system (C-axis).
- ESA S875 controller.
- Monoblock steel frame (ST44 A1), manufactured and welded with high precision in accordance with structural requirements. Stress-relieved for maximum rigidity and long service life.
- Ground, hardened and chrome-plated cylinders with high-quality seals.
- Have (Hoerbieger) hydraulic system.
- Large beam stroke.
- European-type quick-release tool clamping system.
- Standard full tooling set included.
- Linear scales on cylinders for high-precision synchronized control.
- Sliding front support arms with T-slot.
- Side and rear safety switches.
- Electrical system (Siemens / Schneider).
- Laser safety protection system.
Optional equipment
- Delem DA-66T controller.
- Delem DA-69T controller + 3D offline software.
- Industry 4.0 integration capability.
- Multi-axis back gauge with 2 to 6 servo-driven axes (Z1–Z2, X1–X2, R1–R2).
- Fast mechanical upper tool clamping system.
- Wila mechanical upper and lower tool clamping system.
- Wila hydraulic upper and lower tool clamping system.
- Tandem operation preparation.
- Hydraulic oil heater.
- Hydraulic oil cooler.
- Automated front sheet support (sheet follower system).
- Laser angle measurement system.
| MODEL | Bending length | Capacity | Y axis speed | Stroke | Daylight Opening | Throat Gap | Inside Frames | Overall length | Side Frame Width | Overall height | Worktable height | Motor power | Oil tank capacity | Approx. Weight | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | Approach speed | Bending speed | Return speed | C | D | E | B | L | W | H | F | |||||
| mm | Ton | mm/sec | mm/sec | mm/sec | mm | mm | mm | mm | mm | mm | mm | mm | kW | L | Kg | |
| 1550-60 | 1550 | 60 | 180 | 10 | 160 | 220 | 410 | 400 | 1250 | 2445 | 2200 | 2390 | 900 | 7,5 | 100 | 4300 |
| 2050-60 | 2050 | 60 | 180 | 10 | 160 | 220 | 410 | 400 | 1650 | 2845 | 2200 | 2390 | 900 | 7,5 | 100 | 4900 |
| 2600-60 | 2600 | 60 | 180 | 10 | 150 | 220 | 410 | 400 | 2150 | 3355 | 1930 | 2390 | 900 | 7,5 | 100 | 5500 |
| 2600-100 | 2600 | 100 | 160 | 10 | 150 | 300 | 530 | 450 | 2150 | 3320 | 2260 | 2780 | 900 | 11 | 190 | 7700 |
| 3020-100 | 3020 | 100 | 160 | 10 | 150 | 300 | 530 | 450 | 2555 | 3725 | 2260 | 2780 | 900 | 11 | 190 | 8700 |
| 3020-135 | 3020 | 135 | 160 | 10 | 130 | 320 | 550 | 450 | 2555 | 3745 | 2280 | 2835 | 900 | 15 | 190 | 9600 |
| 3020-175 | 3020 | 175 | 150 | 10 | 130 | 350 | 600 | 450 | 2555 | 3745 | 2280 | 3030 | 900 | 22 | 300 | 11600 |
| 3020-220 | 3020 | 220 | 140 | 10 | 130 | 350 | 600 | 450 | 2555 | 3745 | 2290 | 3055 | 920 | 22 | 300 | 11800 |
| 3020-320 | 3020 | 320 | 125 | 10 | 120 | 400 | 650 | 450 | 2555 | 3785 | 2290 | 3100 | 920 | 30 | 400 | 14800 |
| 3650-175 | 3650 | 175 | 150 | 10 | 130 | 350 | 600 | 450 | 3100 | 4290 | 2290 | 3030 | 920 | 22 | 300 | 12500 |
| 3650-220 | 3650 | 220 | 140 | 10 | 130 | 350 | 600 | 450 | 3100 | 4290 | 2290 | 3055 | 920 | 22 | 300 | 12700 |
| 3650-320 | 3650 | 320 | 125 | 10 | 120 | 400 | 650 | 450 | 3100 | 4330 | 2290 | 3100 | 920 | 30 | 400 | 16000 |
| 4050-175 | 4050 | 175 | 150 | 10 | 130 | 350 | 600 | 450 | 3550 | 4740 | 2290 | 3030 | 920 | 22 | 300 | 14200 |
| 4050-220 | 4050 | 220 | 140 | 10 | 130 | 350 | 600 | 450 | 3550 | 4740 | 2290 | 3050 | 920 | 22 | 300 | 14300 |
| 4050-320 | 4050 | 320 | 125 | 10 | 120 | 400 | 650 | 450 | 3550 | 4780 | 2290 | 3100 | 920 | 30 | 400 | 17500 |
| 4050-400 | 4050 | 400 | 80 | 10 | 80 | 400 | 650 | 600 | 3550 | 5000 | 2770 | 3560 | 1095 | 45 | 400 | 25000 |
| 4050-500 | 4050 | 500 | 80 | 8 | 80 | 400 | 650 | 600 | 3550 | 5000 | 2770 | 3560 | 1095 | 45 | 600 | 32000 |
| 4050-600 | 4050 | 600 | 60 | 8 | 60 | 450 | 650 | 600 | 3550 | 5000 | 4050 | 4225 | 1095 | 45 | 600 | 45500 |
| 6050-220 | 6050 | 220 | 100 | 10 | 100 | 350 | 600 | 450 | 5100 | 6825 | 2300 | 3010 | 920 | 22 | 300 | 19000 |
| 6050-320 | 6050 | 320 | 80 | 10 | 80 | 350 | 650 | 450 | 5100 | 6865 | 2280 | 3110 | 920 | 30 | 400 | 23100 |
| 6050-400 | 6050 | 400 | 60 | 8 | 60 | 400 | 650 | 600 | 5100 | 6905 | 2780 | 3615 | 1095 | 45 | 400 | 32000 |
| 6050-600 | 6050 | 600 | 60 | 8 | 60 | 450 | 680 | 600 | 5100 | 7145 | 3275 | 3910 | 1000 | 45 | 600 | 51700 |
ESA S 675 2D
- 24VDC, 100W max power supply.
- 21,5” LCD TFT widescreen display, 1920×1080 resolution.
- Interactive 2D graphic editor for workpieces and tools data entry.
- 2D graphic display of machine frame, workpiece and tools.
- 2D automatic identification of the best bending sequence.
- Complete off-line programming of tools and programs by means of a standard PC.
- Selectable and programmable axes and auxiliary functions.
- Automatic measurement of sheet thickness.
- Database bend angle corrections, possibility to store the corrections according to the angle.
DELEM DA-66 Touch
DELEM DA-66S
DELEM DA-69 Touch
ESA S 675 3D